Palmako EL16-1827, Assembly, Installation And Maintenance Manual

Page: 8 / 118

Installation manual - English
➢
The product must be anchored to the base surface! It is not allowed to use a product that is not
anchored! You must select the anchors (not included in the supplied kit) and the appropriate method of
attachment depending on the base surface (see installation manual)!
➢
It is not allowed to use ground anchors (no concrete poured) with anchor bolts by attachment to
pavement slabs!
The product can be installed on either a soft (for instance: lawn) or hard (for instance: pavement slabs) surface.
A. Soft surface installation
When installing the product on a soft surface, use concrete forks (6 pcs).
NB! The concrete forks are not included in the supplied kit!
Dig a hole for each support (consult with a local construction company), fill it with concrete and place the
concrete forks in the precisely measured spots. Make sure that all the concrete forks are situated at the same
height! Allow sufficient time for the concrete to harden. After that put the product on the forks and attach with
bolts.