Making a call
8
Treo
™
Wireless Headset
Making a call
Do not hold the multifunction button
down too long
when making, ending, or answering a call. This should be only a quick press, so
you don’t accidentally activate your headset’s enhanced features, described later
in this guide.
0
1
Make sure the headset is turned on.
2
Dial the number:
Using the phone’s keypad
Dial the number on the keypad, and then
press the Send key.
Using voice-activated dialing
Press and release the multifunction
button
, and then say the name of the person you wish to dial when
you hear the tone.
The Treo 650 does not support voice-activated dialing
through Bluetooth wireless technology. For other phones check with
the manufacturer. You must set the voice tags on your phone to use
voice-activated dialing. For better reception, record the voice tags from
the headset.
3
Increase or decrease call volume by pressing the volume control
buttons
. The tone volume increases or decreases to match the
call volume.
4
To end a call, press and release the multifunction button
, or press
the button to end a call on your phone’s keypad.
IMPORTANT
[ ! ]
NOTE
Paloma_UG.book Page 8 Wednesday, December 22, 2004 11:14 AM
