Palm m500 Series, Getting Started

Page: 13 / 150

Chapter 1 Page 13
Removing an expansion card
1. Hold your handheld securely.
2. Use your thumb to lightly push against the top of the card,
following the direction indicated by the expansion card icon on the
back panel of your handheld. The expansion card slot releases the
card, and your handheld plays the system sound.
3. Lift the card from the expansion card slot.
Note: Your handheld comes with a dummy card seated within
the expansion card slot. To prevent debris from entering
and damaging the slot, we suggest that you leave the
dummy card seated when you are not using an expansion
card.
Using Peripheral Hardware
Your handheld is equipped with a universal connector, by which it
attaches to the HotSync cradle. You can also use the universal
connector to attach peripheral hardware devices to your handheld,
such as a modem, portable keyboard, or a Global Positioning System
(GPS) receiver. For information about the installation and operation of
hardware devices, please refer to the documentation that accompanies
each device.