Palm IIIc Handbook Download Page 125

Page: 125 / 246

Chapter 5

Page 117

To select HotSync options:

1. Click the HotSync icon



in the Windows system tray (bottom-

right corner of the taskbar).

2. Choose Custom.

Tip:

You can also choose Custom from the HotSync menu in
Palm Desktop software.

3. Select Mail in the list box.

4. Click Change.

5. Click one of the following settings:

Note: Changing the HotSync setting from the default affects only the

next HotSync operation. Thereafter, the HotSync Action
reverts to the default setting.

Synchronize
the files

Synchronizes the mail on your organizer and
your desktop E-Mail application.

Desktop
overwrites
handheld

Replaces the mail on your organizer with the
mail in your desktop E-Mail application. You
should use this option only if, for some reason,
the two inboxes get out of sync.

Do Nothing

Turns off communication between your
organizer and desktop E-Mail application.

Summary of Contents for IIIc























































































































































































































































Search results

Summary of Contents for IIIc

Reviews:

Related manuals for IIIc

Brands by name

Popular brands

Palm IIIc, Handbook

Search results

Summary of Contents for IIIc

Reviews:

Related manuals for IIIc

Brands by name

Popular brands