![background image](http://html1.mh-extra.com/html/pallmann/king-cobra/king-cobra_operating-instructions-manual_748108011.webp)
6
Disassembling for transport
For easy transportation the motor and the guide tube can be removed.
6.1
Removing the guide tube
Caution!
Injury to the operator or other persons could occur or damage could occur if the machine
starts up unintentionally. Disconnect the machine from the power supply before working
on the machine!
Instructions:
1. Fold down the cable arm (3).
2. Move the main lifting lever (2) to the front position in order to lower the sanding drum to the
floor. This removes the load from the control rod (5).
3. Loosen both of the wing bolts a little (4). Push the handle down to detach the control rod
(5) from the connector (8).
4. Open the guide tube support (7) with the clamping lever (6) and pull the guide tube (1) out.
11
05/2011