11
09/2010
6.
Start-up
Caution!
Danger to life from electric shock! Before start-up, check the power cable for damage!
Never operate the tool with a damaged power cable.
Caution!
Note the data on the type plate. Only use with the intended mains voltage or frequency.
6.1
Fitting the hand grip
The hand grip (1), for installation on the
side of the tool, can be screwed in on
the left of the motor gearhead.
7.
Operation
7.1
Switching on and off
Caution!
Risk of injury! To switch on the tool, hold it in both hands and pick up the sanding plate
off the floor or surface.
Brief operation without lock:
First press the switch lock (2), then press
and hold the switch (3). Release the switch
lock (2). To switch off, release the switch.
Extended operation with lock:
First press the switch lock (2), then press
and hold the switch (3). To lock, hold
the switch lock (2) and release the switch (3).
Release the switch lock (2). To switch off,
briefly press then release the switch (3).
1
2
3
Summary of Contents for GECKO FLEX
Page 15: ...15 09 2010 Für Ihre Notizen ...
