![background image](http://html1.mh-extra.com/html/pallmann/cobra-classic/cobra-classic_translation-of-the-original-operating-instructions_3329222026.webp)
26
PALLMANN GmbH l Ein Unternehmen der Uzin Utz AG | Im Kreuz 6 | 97076 Würzburg | T49 931 27964-0 | T49 931 27964-50 I www.pallmann.net
8.2 Adjusting the running wheels
If the machine only sands on one side, the surface setting must be adjusted. Following
replacement of the sanding drum or running wheels, the surface setting must always be newly
adjusted. To make a level, uniform setting, the sanding drum and the running wheels must rest
on the same plane. The right running wheel is adjustable. The left wheel does not adjust.
The running wheel adjustment gauge is required to adjust the machine.
For optimal results check the the grinding pattern after adjusting.
1
1
2
2
3
3
4
4
5
5
6
6
A
A
B
B
C
C
D
D
Zust.
Änderungen
Datum Name
Datum
Name
Bearb.
Gepr.
Norm.
Maßstab
Werkstoff:
Mat-Nr.
Blatt
Dateiname
ZB aktuell
01.10.2014 HeinzD
7
A3
370001001-0_5.idw
1 : 5
WOLFF Eine Marke der Uzin Utz Gruppe
Oberfläche
Frank Cobra Classic
Instructions:
1. Turn the machine off.
2. Disconnect the machine from the mains power.
3. Lay the machine on its left side.
4. Use the roller adjuster to adjust the
the ACTUAL position of the adjustable roller.
5. Check the grinding pattern. If the machine grinds more on the roller protection side (1), the adjustable wheel must
be adjusted away from the machine base. If the machine grinds more on the belt guard side (2), the adjustable
wheel must be adjusted in the opposite direction to the machine base.
6. Set the wheel adjustment aid to the desired nominal dimension.
1
1
2
2
3
3
4
4
5
5
6
6
A
A
B
B
C
C
D
D
Zust.
Änderungen
Datum Name
Datum
Name
Bearb.
Gepr.
Norm.
Maßstab
Werkstoff:
Mat-Nr.
Blatt
Dateiname
040383
Rad Einstell-Hilfe
15.03.2016 HeinzD
2
A3
1693.idw
1 : 2
WOLFF Eine Marke der Uzin Utz Gruppe
Oberfläche
Frank Cobra
Correction for grinding pattern (1)
Actual state
Correction for micrograph (2)