![background image](http://html1.mh-extra.com/html/pallmann/78319/78319_translation-of-the-original-instructions_748102021.webp)
21
PALLMANN GmbH l Ein Unternehmen der Uzin Utz AG | Im Kreuz 6 | 97076 Würzburg | T49 931 27964-0 | T49 931 27964-50 I www.pallmann.net
Observe the relevant regulations in your country for the
materials to be worked.
The vacuum cleaner must be approved for the extrac-
tion of masonry dust. WOLFF provides:
Cleaner Wolff Starvac #060800
Insert the suction hose of the vacuum cleaner in
the Connecting from the machine. (7)
4.5 The display (20) indicates the power consumption.
(amps) Fig. D
3 LEDs illuminated green:
► Machine operational, no faults.
1 LED illuminated yellow or red:
► Machine in overload range
► Machine shutdown imminent
► Overload protection triggered
5.0 Ending the work
►
After completing the work, the drive plate or tool
plate must be removed. When you leave the
machine, always unplug the power plug from the
socket. Never leave the drive plate or brush on
the machine after finishing work!
6.0 Transport
Remove grinding disc and dust sealing ring before trans-
port. When carrying, use the handles provided at the front
and rear of the machine.
7. Maintenance and Service
7.1 Maintenance and Cleaning
► Before any work on the machine itself, pull the
mains plug.
► For safe and proper working, always keep the
machine and ventilation slots clean.
► Clean the cooling fins of the engine and electronics
regularly.
Once work has been completed, the clamping devices
must be disassembled and the machine cleaned
The machine must then be sent to an after-sales service
agent. Addresses are listed in the Section “After- sales
service and customer assistance”.
If the machine should fail despite the care taken in manu-
facturing and testing procedures, repair should be carried
out by an after-sales service centre for Pallmann GmbH
power tools.
In all correspondence and spare parts orders, please al-
ways include the article number specified on the type plate
of the machine.
7.2 Spider and triple disc maintenance plan
Regular maintenance and cleaning of the machine in-
cluding its components helps to reduce repairs, damage
and breakdowns. In addition, a well-maintained and clean
machine gives a positive impression to the customer!
Daily maintenance/cleaning for cementitious
grinding work
single disc grinding machine Spider
► Pull the mains plug!
► Remove grinding disc, three-wheel disc and
weights.
► Wash the wheels and suction ring with a damp
cloth.
► Remove dust and dirt from the cooling fins of the
motor and electronics using a hand wiper and a
damp cloth.
► Clean the underside of the chassis completely with
a hand wiper. The hole from the extraction must be
free!
► Check plugs and cables for damage and fit.