background image

USERS MANUAL  |      

15

EXCLUSIONS FROM THIS WARRANTY

The warranty excludes defects caused by the misu-

se of water treatment device. The consumer should 

pay attention to the following points;

 

Ÿ

Damage and defects caused by the misuse, 

 

Ÿ

Damage and defects during loading, handling 

and transportation after the delivery to the cus-

tomer, 

 

Ÿ

Low or high voltage, damages and defects due 

to electrical faults, 

 

Ÿ

Defects resulting from failure to comply with ins-

tructions specified in the users manual, 

 

Ÿ

Replacements of membrane and filters are out of 

warranty. They are consumable elements. 

 

Ÿ

Warranty period of product is 2 (two) years in 

case of manufacturing defects. 

 

Ÿ

Exeeding minimum span for repair of the device.

Damages and defects resulting from the abo-

ve-mentioned matters are not covered by the war-

ranty and the service can be provided in return of 

a fee. The responsibility for handing over the war-

ranty certificate to the consumer is of seller, dealer, 

agent or representative who sells the product.
In the event that the warranty certificate is tam-

pered and altered, the warranty certificate will be 

invalid.

DAMAGES AND DEFECTS DUE TO THE 

MISUSE

 

Ÿ

Loss of original parts of the device or demoun-

ting the parts contrary to the instructions. 

 

Ÿ

Damages and defects resulting from the factors 

such as crash, scratch, break etc. 

 

Ÿ

Damages and defects due to transportation and 

storage conditions. 

 

Ÿ

Damages and defects resulting from replace-

ment or damage of electrical cable connections.

 

Ÿ

Damages or defects resulting from paint or stain 

on any part of the product. 

 

Ÿ

Damages or defects due to sticking any label on 

the device. 

 

Ÿ

Damages or defects due to natural disasters. 

 

Ÿ

Damages or defects resulting from running the 

device with water below 5oC degrees and above 

40oC degrees. 

 

Ÿ

Damages or defects due to electric networks. 

 

Ÿ

Damages or defects due to replacement of parts 

or materials in the device by any other parties 

which are not an authorized service. 

 

Ÿ

Damages or defects due to unknown material 

found inside the product.

 

Ÿ

Problems resulting from failure to comply with 

installation, operation or maintenance instructi-

ons or drawings, or improper installation, opera-

tion or maintenance.

 

Ÿ

Damages and defects resulting from using 

non-original spare parts and accessories. 

 

Ÿ

Damages and defects resulting from running the 

product without water or inadequate water. 

 

Ÿ

Damages and defects due to failure to perform 

periodical maintenance and controls. 

 

Ÿ

Damages and defects resulting from clogged 

wastewater drain and running the clogged de-

vice.

 

Defects that are not covered by the    

 

warranty will be repaired at our   

 

 

authorized service centers.

WARRANTY CONDITIONS

Warranty certificates without dealer’s stamp and signature, 
sales date, brand and model are invalid. The original or pho-
tocopy of the invoice must be kept and submitted with the 
warranty certificate if necessary. Otherwise, the date of manu-
facture on the device will be deemed as beginning of warranty. 
The customer cannot claim rights or indemnity other than these 
undertakings.

Summary of Contents for RO500





















Reviews: