UT310
UT310 Series
RETURN LINE IN-TANK FILTERS
s e r v i c e
i n s t r u c t i o n s
7.4 DO NOT run the system without a filter element installed.
Use replacement filter element part number called for on
the element change label.
7.5 Thoroughly clean the cover threads. Apply a high quality
anti-seize made for use with Aluminum to the entire
threaded surface of the cover.
7.6 Lubricate the element O-rings with clean system fluid
and install element in the Can subassembly (3). Refit the
Cover Sub-assembly (2). HAND TIGHTEN ONLY.
7.7 After starting the system check for leaks as per section
5.2. When system reaches normal operating
temperature, check that the electrical switch has not
actuated and/or the pressure gauge shows pressure in
the normal operating range.
8
Warranty, Limitation of Liability
and Remedies
THERE IS NO WARRANTY OF MERCHANTABILITY OR
FITNESS FOR ANY PARTICULAR PURPOSE WITH RESPECT
TO ANY OF THE PRODUCTS, NOR IS THERE ANY OTHER
WARRANTY EXPRESS OR IMPLIED, EXCEPT AS PROVIDED
FOR HEREIN.
For a period of twelve months from the date of delivery
from Seller or three thousand hours of use, whichever
occurs first (the “Warranty Period”, Seller warrants that
products manufactured by Seller when properly installed
and maintained, and operated at ratings, specifications and
design conditions, will be free from defects in material and
workmanship. By way of explanation and not limitation, the
Seller does not warrant the service life of the filter element
as this is beyond the Seller’s control and depends upon the
condition of the system into which the filter is installed.
Seller’s liability under any warranty is limited solely (in Seller’s
discretion) to replacing (FOB original ship point), repairing
or issuing credit for products that become defective during
the Warranty Period. Purchaser shall notify Seller promptly in
writing of any claims and provide Seller with an opportunity to
inspect and test the product claimed to be defective. Buyer
shall provide Seller with a copy of the original invoice for the
product, and prepay all freight charges to return any products
to Seller’s factory, or other facility designated by Seller. All
claims must be accompanied by full particulars, including
system operating conditions, if applicable.
Seller shall not be liable for any product altered outside of
the Seller’s factory except by Seller or Seller’s authorized
distributor, and then, as to the latter, only for products which
have been assembled by the distributor in accordance with
Seller’s written instructions. Nor shall Seller be liable for a
product subjected to misuse, abuse, improper installation,
application, operation, maintenance or repair, alteration,
accident or negligence in use, storage transportation or
handling.
In no event will Seller be liable for any damages, incidental,
consequential or otherwise, whether arising out of or in
connection with the manufacture, packaging, delivery, storage,
use, misuse, or non use of any of its products or any other
cause whatsoever.
4
