24
7.
Press Pause to set the length of time the Wand Mixer should pause for that instruction. When the keypad
opens, type the length of time to pause and then press Ente r.
8.
Press Run to set the length of time the Wand Mixer should run for that instruction. When the keypad opens,
type the length of time to run the mixer and then press Ente r.
9.
Press Spe ed to set the RPM set point at which the Wand Mixer should run for that instruction. When the
keypad opens, type the RPM set point and then press Ente r.
10.
Press Save to save your changes to the recipe. To return to the Automatic Mode screen without saving your
changes to the recipe, press Cancel.
Figure 18
Recipe editor screen.
To edit the recipe name, follow these steps:
1.
Press Se lect on the Automatic Mode screen. The Recipe Selector screen opens.
2.
Use the arrow buttons at the top of the screen to scroll through the list of recipes until you find the name you
want to edit.
3.
Press Edit. The Recipe Editor screen opens.
4.
If needed, press the Back and Ne xt buttons on the right side of the screen to scroll through the list of
instructions for that recipe.
5.
Press the button with the recipe name in it. An entry screen opens.
6.
Use the onscreen keyboard and arrows to change the name of the recipe then press enter.
7.
Press Save to save your changes. To return to the Automatic Mode screen without saving your changes to the
recipe, press Cancel.
Use the manual mode to run the mixer either continuously or for a specific amount of time at a given RPM. The
manual mode is ideal for mixing jobs that have no additional parameters. If the job requires mixing at different
speeds use automatic mode instead.
To use the manual mode, press M anual Mode on the Main Menu. The Manual Mode screen will open. The status
bar will display
“MANUAL MODE”
.
