PTV 35/44/55/66 Installation Manual
Rev. 1.1
40
2. Installing the Liftgate: The liftgate will be pre-equipped from the factory with alignment buttons installed
on the front side of the columns. To install the liftgate to the Vehicle Brackets pre-installed on the
vehicle, lift/hoist the liftgate, align the alignment buttons with the mounting slots on the Vehicle
Brackets. Slowly maneuver the liftgate buttons into the slots until the liftgate columns become flush with
the Vehicle Brackets. Slowly lower the forklift forks/hoist so that all buttons are seated properly in the
vehicle bracket slots.
Alignment
Buttons on
Front Surface
of Columns
Vehicle
Bracket
Button
Slots
3. Bolting the Columns: Use the provided bolts to prevent the column buttons from moving out location on
the vehicle bracket. Install two bolts on the right and left side columns to secure the bottom section of
the vehicle bracket. Torque bolts to 94 ft/lb.
End of
Vehicle
Body
Column
Wrap
Bolts
Not
Used
Optional:
For moderate to heavy use, it is
recommended to weld the column
wraps to the vehicle.
3"
1/4"
2X