49
ENGLISH
8 PRELIMINARY
OPERATIONS
8.1 LOADING THE PELLETS
7KH¿UVWRSHUDWLRQWREHSHUIRUPHGEHIRUHVWDUWLQJ
WKHDSSOLDQFHLVWR¿OOWKHKRSSHUZLWKIXHOSHOOHWV
The pellets are loaded into in the hopper using a
scoop.
Do not empty the sack directly into the hopper so
as to avoid loading sawdust or other foreign bodies
that may affect proper stove operation and avoid
spilling pellets outside of the hopper.
Make sure the hopper lid is well closed again after
having loaded the pellets.
8.2 POWER
SUPPLY
Plug the stove into the mains power supply, move
the power switch at the rear of the stove to position
“I” (Fig. 8.1). If the connections are correct the stove
will emit a series of intermittent beeps and the
display will come on. After 2 seconds the display
will show “OFF” and the second row will show the
operating parameters: POWER, AIR FAN, SET
ROOM T..
On Silent series stoves (no ventilation) the “air fan”
parameter is not featured.
If not using the appliance for an extended period,
the switch at the rear of the stove should be moved
to position (O).
8.3 INITIAL
SETTINGS
The language, current date and time need to be set
before using the stove.
8.3.1 language
setting
Go to the “STOVE SETTINGS MENU” following the
“Procedure for accessing the menus” and press
OK
.
1) Scroll the submenus using the
or
button
2) Use the
button to select the “
LANGUAGE
”
menu
3) Select the desired language using the
or
button
&RQ¿UPWKHVHOHFWLRQE\SUHVVLQJ
(“ok”)
5) Press
OFF
(“x”) to exit the submenu (press the
same button again if necessary to go back
another menu level).
8.3.2 Time
setting
Go to the “STOVE SETTINGS MENU” following the
“Procedure for accessing the menus” and press
OK
.
4) Scroll the submenus using the
or
button
5) Use the
button to select the “
TIME
” menu
6) Select the current day using the
or
EXWWRQDQGFRQ¿UPE\SUHVVLQJ
(“ok”)
7) Select the current hours using the
or
EXWWRQDQGFRQ¿UPE\SUHVVLQJ
(“ok”)
8) Select the minutes hours using the
or
EXWWRQDQGFRQ¿UPE\SUHVVLQJ
(“ok”)
9) Press
OFF
(“x”) to exit the submenu (press the
same button again if necessary to go back
another menu level).
8.3.3 Date
setting
Go to the “STOVE SETTINGS MENU” following the
“Procedure for accessing the menus” and press
OK
.
4) Scroll the submenus using the
or
button
5) Use the
button to select the “
DATE
” menu
6) Select the current day, month and year desired
using the
or
EXWWRQDQGFRQ¿UPHDFK
selection by pressing
(“ok”)
7) Press
OFF
(“x”) to exit the submenu (press the
same button again if necessary to go back
another menu level).
Fig. 8.1