INSTALLATION
10382 9-27-05
GENERAL INFORMATION
The BRADCO Vibratory Rollers were designed to be easy to use and maintain. They
are operated by the loaders auxiliary hydraulics. The Vibratory Rollers mount to the toolbar /
quick attach mechanism for easy mounting.
NOTICE:
DO NOT operate the Vibratory Rollers on a Hi-Flow hydraulic system (25
GPM Maximum). Damage to the hydraulic motor will occur.
NOMENCLATURE
Throughout this manual, reference is made to various Vibratory Roller components.
Study the following diagram to acquaint yourself with the various names of these components.
This knowledge will be helpful when reading through this manual or when ordering service
parts. There is a complete parts breakdown for each roller at the back of this manual.
SCRAPER PLATES
POWER & RETURN HOSES
HYDRAULIC
MOTOR
HITCH FRAME
SPRING CLAMP ASSEMBLY
FRAME
DRUM
(SMOOTH SHOWN)
MOTOR GUARD
RELIEF VALVE
ATTACHING
Install the Vibratory Roller by following your power unit operator’s manual for proper
installion of an attachment. Connect the power and return hoses to the auxiliary hydraulic cou-
plers on the loader.
IMPORTANT: All hose routings should be check for kinks or pinching.
Reroute if necessary.
WARNING! To Avoid Serious Personal Injury, make sure the Vibratory Roller is securely
latched to the attachment mechanism of your unit. Failure to do so could
result in separation of the attachment from the unit.
12
75595
