1.
Connect the Left and Right Legs to the
Base using the provided Allen Wrench and
four (4) Base Screws and Lock Washers.
See
FIGURE 1.
2.
Using an Allen Wrench and four (4) Leg
Screws and Lock Washers, attach the Left
and Right Legs to the Lower Housing. See
FIGURE 1.
3.
Install the Chute to the Top Housing using an
Allen Wrench and two (2) Chute Screws and
Lock Washers. See
FIGURE 2.
4.
Insert the Blade Assembly into the Lower
Housing, guiding the Drive Shaft into the
bearing journals. Make sure the gears and
the blades of the Blade Assembly are
properly meshed together and resting in the
journals.
See
FIGURE 3.
ASSEMBLY INSTRUCTIONS
FIGURE 1
FIGURE 2
FIGURE 3
