1
1
2
3
4
7
6
8
5
1. Nozzle
2.
3.
4. Temperature
5. Switch
6.
7.
8.
Heat guard
Cool air intake
control
Handle
Hanger
Power cord
FEATURES OF HEAT GUN
VARIABLE TEMPERATURE CONTROL
2
Before starting work, please take a few minutes to carefully read all Instructions. Pay close
attention to safety guidelines and warnings included for your protection. Save these instructions for
future use.
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
To reduce risk of fire or electric shock , do not expose to rain or moisture. Store indoors.
Read instruction manual before using.
Nozzle gets extremely hot. Wear gloves and eye protection.
For safe operation, read manual thoroughly.
When servicing, use only identical replacement parts.
NEVER USE THE HEAT GUN AS A HAIR DRYER!
Never direct the hot airflow toward people or animals.
Never use the heat gun near flammable materials or gases.
Never obstruct the hot airflow by blocking or covering the air outlet. Never Touch the hot air
nozzle. It becomes extremely hot.
Wear protective work gloves at all times.
Never touch the nozzle to any surface when running the gun or shortly after running.
Always wear eye protection when removing paint from overhead position.
Do not wear loose-fitting clothing or jewelry. Wear nonskid footwear and a protective hair
covering to contain long hair.
Maintain proper balance and footing at all times.
Keep the gun handle dry, clean and free from oil and grease.
Do not force the tool or accessories and use only for the purpose intended.
Always stand gun in an upright position or hang it up by its convenient hanger.
Never use the tool in wet environments or areas of high humidity (for example: bathroom,
steamrooms, etc.).
Never use the gun in the rain or on extremely damp days.
Never poke anything down inside the hot air nozzle.
Always allow the heat gun to cool down completely before storing it.
Always store the gun in a safe place, out of the reach of children. IT IS NOT A TOY.
Know the work environment. Areas behind ceilings, floors and soffits may contain highly
flammable materials.Always check these areas before applying heat.
Keep work area clean and uncluttered.
Keep work area well lighted.
Keep children and visitors away from work area, the tool, and extension cords.
Guard against electric shock by preventing contact, with grounded surfaces (for example: pipes,
radiators, ranges and refrigerator enclosures.)
Never carry the gun by its power cord or yank the cord from an electrical outlet.
Use only proper rated extension cords. (See following sections.)
Inspect extension cords periodically and replace if damaged.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
