2
CONTENTS
PAGE
2
Guides and Warnings
3
Nicheless Installation
6
Connecting Light
7
Connecting to driver
8
Troubleshooting
8
Terms and Conditions
GUIDES AND WARNINGS
Tools Required:
Phillips Head No. 2 Screw Driver
IMPORTANT INFORMATION:
THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS OR NOT FOR
EMERGENCY LIGHTING.
ENSURE LIGHT VOLTAGE MATCHES POWER SUPPLY VOLTAGE BEFORE
CONNECTING ANY LIGHT. MISMATCHED VOLTAGE MAY RESULT IN CATASTROPHIC
FAILURE OF LIGHT (VOIDING WARRANTY) AND/OR ELECTRICAL SHOCK AND
SERIOUS BODILY HARM. PAL LIGHTING ACCEPTS NO RESPONSIBILTY FOR
INCORRECTLY INSTALLED LIGHTS.
1) Ensure that the electrical system for your pool conforms with all the
requirements of the National Electrical Code (NEC) and all relevant local codes and
ordinances.
2) This Underwater Light must be installed in accordance with the National
Electrical Code by a Certified Electrician or a Qualified Pool Technician. NOTE: No
Bonding Terminal is required on the forming shell since the fixture is an all plastic
construction and complies with NEC article 680 Requirements.
To be certain that the pool or spa electrical system meets all applicable
requirements, the electrician should also consult the local building department.
CANADIAN INSTALLATION
Be sure the electrical system of your pool conforms with the following
requirements of the Canadian Electrical Code (CEC), CSA C22.1 and all local codes
and ordinances. A licensed or certified electrician must install the electrical system
to meet or exceed those requirements before the light and (fixture-housing)
is installed. Failure to do so could result in death or serious injury to service
technician, pool users or others due to electrical shock.
