Pakon Part#125384-A
February 9, 2005
16
7. Aim the hose of a can of compressed air into the film path--aiming for the clear piece of glass
in the middle.
8. It may be beneficial to insert a strip of film into the scanner before blowing it out. This will
focus all the air onto the light transfer bar, and should dislodge any dust or debris.
9. When finished, put the film path cover back in place.
Turn off the scanner immediately when finished cleaning the scanner!
10. Turn off the scanner and unplug the power cable.
11. Replace the side cover by snapping into place.
12. Plug in the USB and power cables.
Cleaning Illumination with Cotton Swab
CAUTION--Be Careful not to scratch or damage the top of the glass light bar!
1. Turn off the scanner.
1. Disconnect the USB and power cables.
2. Gently remove the side cover.
3. Using a long cotton swab, dabbed in isopropyl alcohol, clean the illumination bar inside the
film track assembly.
4. The illumination bar is a small piece of glass, sitting upright.
Summary of Contents for F-335 Series
Page 1: ...F 335 Series User Manual ...
