Pakon F-335 Series, User Manual

Page: 14 / 24

Pakon Part#125384-A February 9, 2005 13
LED Indicator Lights
Digital ICE
Digital ICE is designed to assist in removing scratches, dust, and debris artifacts from
scanned film. It should be used as a complement to a photo lab’s normal cleaning procedures.
Customers are still advised to clean the floors and work surfaces regularly to keep the lab environ-
ment as dust-free as possible.
It is also recommended to clean all film with a lint-free cloth before attempting to make
prints 8”x10” or higher.
If a lab is having persistent dust problems, it is recommended to perform the following
regularly:
•Clean all customer film with a lint-free cloth before scanning it.
•When the scanner is turned off, cover it with a plastic, or lint-free cover.
•Use a lint-free cloth daily to clean the cover of the scanner and the surface of the table it
is positioned on.
•Clean or replace the air filter on the back of the scanner once per week.
Power LED Function
Solid Green +5V is functioning
Off +5V is not functioning
Status LED Function
Solid Green Scanner Ready
Blinking Green Scanner is Scanning
Blinking Yellow Scanner is Calibrating
Blinking Red Scanner Error
Off Scanner not Functioning
APS LED Function
Solid Green Scanner in APS mode
Blinking Green Scanner is Scanning
Blinking Red APS mode Error
Off Scanner in 35MM mode