1.
4.
2.
3.
5.
6.
2x
3x 8mm
3x
Name
8mm
10mm
Drilling template
Instructions
We recommend to mount the Paketsafe together with
a second person. Select an appropriate place which is
easily accessible for parcel delivery agents. Also
consider that the filled bag will have a certain space
requirement.
Open the lid and mark the position of the screws
right on the surface. Alternatively you may want to
use the drilling template shown above.
By using a water spirit level, you ensure a leveled
mounting.
Drill three holes with 8mm diameter.
Place the screw anchors fully in the drilled holes.
Please put each screw through a disc, the steel sheet
bar, the bag and the Paketsafe housing. Then tighten
all screws.
The bag can now be stowed in the Paketsafe. Fold
the left and the right side of the bag to the inside.
The folded bag should not be broader than the
housing. Roll up or fold up the bag.
Please find the
video instruction
under:
www.paketsafe.net/paketsafe-plus-verstauen
Finally, please label your Paketsafe with your name.
The included name plate can either be labeled by
hand or you can get it engraved with your name at a
e.g. lock and key service.
All other labels can be used optional as required.
Your Paketsafe is now ready to use!
Tools:
