Pakedge SK-24, Quick Start Manual, Page: 9 / 12

9
4. To set ports with the ability to only access a single VLAN, click the VLAN you want to use
under “ Access ”.
Then click on the ports above you wish to set with that VLAN. Once you have the ports
you want selected, click Apply at the bottom of the page to save those settings.
5. To set ports in Hybrid mode (one Default VLAN and multiple Tagged VLANs), first click the
“ + ” symbol under “ Hybrid ”. You will then be in the Hybrid profile configuration mode.
6. First select the Untagged Default VLAN to be used on the port (normally VLAN1).
7. Next select one or more other VLANs to be used for tagged VLAN traffic.
8. Lastly, click on the box under “ Assigned Port ” and then click on one of the ports above to
set this profile on a switch port v
9. Once the changes have been made you can click “ Apply ” at the bottom of the page to
save the settings.