Pakedge SK-24 Quick Start Manual Download Page 12

pakedge

device&software inc 

3847 Breakwater Avenue Hayward,CA 94545

Main: 650-385-8700 Fax: 650.685.5520 

www.pakedge.com

[email protected]

Technical Support

Please visit our website for up to date support information.

   

                                                 Web: 

www.pakedge.com

 

 

               

Email: 

[email protected]

FCC Statement:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to 

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter-

ference when the equipment is operated in commercial environment. This equipment generates, uses, and 

can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, 

may cause harmful interference to radio communications. Operation of this equipment in a residential area 

is likely to cause harmful interference in which case the user will be required to correct the interference at 

his own expense.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance 

could void the user’s authority to operate this equipment.

This device complies with part 15 of the FCC Rules. 

Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and(2) this device must accept any interference received, 

including interference that may cause undesired operation. The manufacturer is not responsible for any radio 

or TV interference caused by unauthorized modifications to this equipment.

© Pakedge Device & Software Inc. 2015 – All Rights Reserved

Summary of Contents for SK-24













Reviews: