INTRODUCTION:
The SE-5P2-EP is a compact, high-performance Gigabit Ethernet
switch equipped with five auto-speed-sensing 10/100/1000Mbps ports.
The switch will automatically negotiate with its connected partners on
the network speed and duplex mode.
The SE-5P2-EP has the option to be powered by a traditional A/C
adapter or by a PoE+ Source. Use of PoE input gives the user the
opportunity to install the switch in remote places where power outlets
are inaccessible.
The SE-5P2-EP also has the option to output PoE over two ports. If you
power the switch via the A/C adapter you will have two Ethernet ports
that can use PoE. You can also power the switch using an 802.3at PoE
Plus source and that will allow you to power the switch as well as still
provide two ports of PoE.
The capabilities of this PoE Passthrough switch mean PoE powered
devices can now be located further from wall power and in locations not
possible before because of distance limitations.
*CAUTION: Do not plug-in both the PoE and A/C Adapter. Doing so
may damage the switch.
The SE-5P2-EP delivers a dedicated 10/100/1000Mbps connection to
every attached client with no bandwidth congestion issue. It supports
auto MDI / MDI-X function as well as 9k jumbo frames, which mean
better network performance because the switch can send more data at
the same time. Each port could be used to connect to another switch
or hub with no crossover RJ-45 cable.
The switch is plug-n-play without any software to configure and also
fully compliant with all network protocols. Its heavy duty metal chassis
design provides for proper cooling and makes it easy to place on a
desk or mount on a wall. In addition, the fan-less design results in
silent operation, which is especially important when it is mounted to a
wall.
Following contents in this package
：
•
One Gigabit Ethernet switch
•
One AC power adapter (optional)
•
User’s manual
3
Summary of Contents for SE-5P2-EP
Page 4: ...4...
