7
NOTE:
If your computer is not set to the default IP scheme of the NK-1 (192.168.1.X), you must first configure the TCP/IP settings on
your computer to log in to the NK-1 through a web browser.
Step 1: Logging in
1
Connect the NK-1 to power and press the power switch on the rear panel. The
PWR
LED will
light up.
2
Connect a computer to the NK-1 through an Ethernet cable. Enter
192.168.1.240
into the
address bar of your web browser. A login page opens.
3
In the
username
box, type
pakedge
. In the
password
box, type
pakedgen
, then click
Login
.
