13
Setting the IP address and updating the firmware
If your wireless access points have duplicate IP addresses, the controller will ask you to configure
the IP address of your access point.
1
Click
Apply DHCP
to get the dynamic DHCP from your router in the network. Make sure
your router is on and can assign IP addresses correctly.
- OR -
Click
Static IP
, input your desired IP address range in the blanks, and click
Set
. If the
IP address of your wireless access points has been configured, this step will be skipped.
The access points must all be on the same firmware version. If there is any inconsistency in
the firmware version,
the controller will
notify you as follows:
