PAJ
Sensor A/S • Grundtvigs Allé 163 • DK-6400 Sønderborg
Tel: +45 74 43 71 81 • Fax: +45 74 43 71 91 • CVR: 3459-1229 • www.paj.dk • e-mail: [email protected]
APPROVALS: ISO 9001, ISO 14001, ISO 13485, IEC 61340-51 & IPC-A-610 CLASS 3
03-01-0501-CRJ-04 Side 5 af 53
Safety observations
The comments about safety in this document will not discuss safety
observations of individual machine parts where safety devices (usually
safety relays) are applied. Here the respective instruction manuals will be
referenced! This document merely describes how to establish a WIO and
how to start it up.
WARNING
The monitoring system during machine operation cannot be guaranteed if
the system is connected incorrectly or not used as specified. This may lead
to fatal injuries. Interventions and changes to the WIO monitoring system
are not permitted, unless they are explicitly described in this user manual
or be written from PAJ Sensors A/S.
The regional legal regulations and conditions of the liability insurance of
the employer must be maintained.
Area of application
The WIO monitoring system is usually used in engines were a WIO will
monitor the water content in lubrication oil, gear box oil, diesel oil,
hydraulic oil or transformer oil.
The advantage of this monitoring system is the simple 4-20 mA interface
and the two relays indicating alarms, with digital readout.
Normally the WIO sensor is calibrated in Taro30 lubrication oil, if nothing
else are defined from customer.