PAJ
Sensor A/S • Grundtvigs Allé 163 • DK-6400 Sønderborg
Tel: +45 74 43 71 81 • Fax: +45 74 43 71 91 • CVR: 3459-1229 • www.paj.dk • e-mail: [email protected]
APPROVALS: ISO 9001, ISO 14001, ISO 13485, IEC 61340-51 & IPC-A-610 CLASS 3
03-01-0501-CRJ-04 Side 11 af 53
Before installation
IMPORTANT
Only qualified personnel may assemble and maintain the unit. Only
qualified personnel may install the unit.
Screw in probe pressure-tight directly in the center of the oil pipe where
the measurement is to take place. The threads should be sealed with
Loctite® 271. The sensor should be mounted with max. torque of 35 Nm.
Connect the cables from the WIO sensor to the Terminal box. Use a
hexagon wrench size 30.