2.5 Turning on
After a successful activation you can switch on the CAR OBD Finder 4G 2.0. By connecting
the FINDER to the power supply the device has already been switched on.
NOTE!
After connecting and starting the FINDER for the first time, it is recom-
mended to move the device for a few minutes. Drive your vehicle a few
kilometers so that the device can dial into the best possible network for
the initial connection.
2.6 Use
As soon as your device has been successfully activated, started up and has sent and
logged data for the first time, you can place it wherever you choose and use your phone,
tablet or PC to start tracking it! You will be able to do this in our App or enter the following
link to the desktop version:
www.finder-portal.com
