- 5 -
MX-6000
User Manual
1-7 Inline Interface Installation
Inline Set Up Mode Installation
By pressing set-up button for three seconds, users can change the inline mode to users’
environment.
1. Inline select mode : Users are able to use printer inline button in operation panel when inline
mode is on.
2. Inline lct cov mode : In the inline mode, it ables to recognize whether feeding unit safety
cover is opened, closed or ignore it so it is possible to set up for users’
environment. (This function is needed when printing security
documents.)
3. Initialize : It makes the machine to be initialized to set-up condition when fi rst delivered from
a warehouse. (Factory default)
1-8 Conveyor Installation
Please refer to page 28 for proper conveyor installation.
1. Please prepare enclosed inline interface
guide and a guide clip.
2. Remove a tray guide if it is set up.
3. Install like the left pictures after moving the
tray down and fi x it by using two fi xing
screws.
4. Install a guide clip like picture B.
5. Change to inline mode by using ‘machine
set up mode’. (Please see below)
Picture A
Picture B
