Paitec IM- 4000, User Manual

Page: 14 / 20

- 13 -
PAPERS ARE NOT FOLDING PROPERLY
PAPERS ARE KEEP BEING SENT TO THE BY-PASS TRAY
Recheck the fold setting with the manual which is located on the folding drum.
After the setting is done, check the folding with plain papers.
Make sure that the printer and the mailfinisher are placed correctly on top of the
printer connecting base plate.
Reset the machine by turning off and back on the power switch. You must reset the
machine everytime you change the paper type, since
IM-4000
is programmend
to only remember the first paper that was fed to the machine. Use the manual feeder to
handle any papers that were sent to the by-pass tray.
THE POWER DOES NOT COME ON
If there is nothing on the screen after you have turned on the power, please wait for
five minutes and turn it back on.
Also please check the fuse inside the socket below the power switch.
If the fuse is dead, please replace it with a different one.
TROUBLESHOOTING