PairGain HiGain SOLITAIRE H2TU-C-319 List 1, Technical Practice

Page: 42 / 70

Monitoring System Activity and Performance 152-319-100-02, Revision 02
34 April 21, 2000 H2TU-C-319 List 1 and List 1C
Alarm History at the HDSL2 Interface
Figure 22 shows the H2TU-C HDSL2 alarm history, and Table 12 describes the alarms.
Figure 22. H2TU-C HDSL2 Alarm History Screen
Table 12. HDSL2 Alarm Descriptions
Screen Alarm Front-panel Alarm Description
LOSW LOSW Loss of Sync Word—The HDSL2 loop has lost synchronization.
MAL MAL Margin—The margin on the HDSL2 loop has dropped below the minimum threshold
value set for the system.
LA LA Loop Attenuation—The attenuation on the HDSL2 loop has exceeded the maximum value
set for the HDSL2 loop attenuation threshold.
HBER HBER Block Error Rate—The HDSL2 BER has exceeded the set threshold limits of 10
-6
or 10
- 7
.
SHORT
(a)
SHRT Indicates a short between the Tip and Ring of the HDSL2 pair.
GND
(a)
(a) Appears only on the H2TU-C line unit.
GND The HDSL2 loop is grounded.
OPEN
(a)
OPEN Indicates a line power open condition.
Monitor Performance Event Log Config Inventory Rlogon Help
H2TU-C HDSL2 Alarm History
------------------------------------------------------------------------------
Alarm First Last Status Count
LOSW 04/03/00 00:00 04/03/00 00:45 ALARM 12
MAL OK 0
LA OK 0
HBER 04/03/00 00:37 04/03/00 00:45 OK 7
SHORT OK 0
GND OK 0
OPEN OK 0
Press: C(l)ear Alarm History
------------------------------------------------------------------------------
Press <Space> to cycle through Interface : H2TU-C HDSL2
choices and <Enter> to view Statistics : Alarm History
ID: xxxx--xxxx--xxxx--xxxx 04/15/00 12:30:01 H2TU-C System: Alarm