PairGain HiGain SOLITAIRE H2TU-C-319 List 1, Technical Practice

Page: 25 / 70

152-319-100-02, Revision 02 Provisioning
H2TU-C-319 List 1 and List 1C April 21, 2000 17
Making Changes to the System Configuration
The Config menu ( Figure 7 ) allows you to make the following types of system configuration changes:
• Standard options ( Figure 8 on page 18 )
• PairGain options ( Figure 9 on page 18 )
• Date and time (see “Setting Date and Time” on page 15 )
• Master clear (see “Clearing the History, Alarm and Event Log Screens” on page 23 )
• Reset to factory default configuration ( Figure 10 on page 22 )
Figure 7. Configuration Menu
Making Changes to Standard and PairGain Options
Figure 8 and Figure 9 on page 18 show the Standard and PairGain configuration options. Standard options are
those that are supported by HiGain Solitaire units when connected to units from other vendors. PairGain options
are an extended set of options that are only available when using HiGain units exclusively. For a description of
each option and a list of possible option settings, refer to
Table 5 on page 19 and Table 6 on page 20 . To make
changes to these options:
1 Press to select the Config menu.
2 Use the and arrow keys to select Standard Options or PairGain Options, and press .
3 Use the arrow keys to select an option.
4 Press the to cycle through the available settings for that option.
5 Press to activate your choice.
Monitor Performance Event Log Config Inventory Rlogon Help
+----------------------+
|
Standard Options -> |
| PairGain Options -> |
| Date and Time -> |
| Master Clear |
| Set Factory Defaults |
+----------------------+
ID: xxxx--xxxx--xxxx--xxxx 04/21/00 12:30:01 H2TU-C System: OK
C
↑↑↑↑ ↓↓↓↓ ENTER
SPACEBAR
ENTER