System Configuration
700-814-112-01, Revision 01
10
November 24, 1999
UTU-814 List 1B
Figure 2.
UTU-814 Console Port and Maintenance Terminal
Connector Pinouts
L
OGGING
O
N
To log on to the maintenance terminal console screen:
1
Press the
several times to activate the autobaud feature and
to display the Logon Password screen.
2
Type the password at the prompt or press
if a password has not
been established. The console screen’s menu bar displays.
The
key is the factory default password. If you
establish a different password, you must type the new
password (single word, no spaces, up to eight characters) on
a subsequent log on. If the system does not respond, verify
that the Hardware Flow Control of the maintenance terminal
is set to NONE.
SPACEBAR
ENTER
ENTER
