PairGain 500L, User Manual

Page: 47 / 98

PRELIMINARY Chapter 6: Configuring Sessions
Megabit Modem 500L Installation Manual 39
PR
EL
IM
IN
A
RY
Configuring the LAN
1 Click EasySession on the Main Menu to access the EasySession page.
2 At the top of the EasySession page, click Edit next to LAN Configuration to display the
PPP Over ATM LAN Configuration page.
3 Do the following to configure the LAN:
‹
Enter the IP Address and IP Net Mask (subnet mask) for the modem Ethernet
10/100BASE-T LAN port. The IP address will not take effect, however, until the
modem is reset.
Œ
Select DHCP Enable if you want to enable the modem to act as a DHCP server to
automatically assign IP addresses to devices on the LAN. If you enable DHCP,
ensure that all devices on the LAN have the TCP/IP stack set to
Obtain an IP address
automatically
(see page 18 ).
‹

Ž
Œ


‘