PairGain 150-2360-01, Technical Practice, Page: 10 / 20

Installation and Turn-up 363-860-100-02, Revision 02
6 March 28, 2000 FRE-860, FRE-865, FRE-867, and FRE-868
I
NSTALLING THE
FRE-865
AND
FRE-867 RT E
NCLOSURES
The FRE-865 and FRE-867 RT Enclosures have external mounting tabs with clearance holes for
3
/
8
-inch bolts
(see Figure 3 ).
1 When mounting to a pole using the Pole Mounting Kit (150-2397-0x), ensure the kit and FRE-86x are fully
installed before connecting the cables. The customer must provide the appropriate mounting hardware.
Follow local practices to ensure a secure mounting. The FRE-867 has lifting tabs to facilitate the mounting
of the enclosure.
Figure 3. FRE-865 and FRE-867 RT Enclosures
2 Connect the HDSL cable stub as listed in Table 3 . The FRE-865 contains only one system (designated as
System 1), the FRE-867 has two systems, System 1 and System 2.
Lifting tabs
Ground bar
Ground bar
Bottom mounting tab
Bottom mounting tab
HDSL stub
HDSL stub
Subscriber stub
Subscriber stub
Top mounting tab Top mounting tab
Subscriber
protectors
HDSL
protectors