PairGain 150-1504-14 Quick Installation Manual Download Page 18

Section 350-

431

-

114

-01

Revision 01

Page 16

HLU-

431

 List 

1D

Specifications

Maximum Power Consumption

14 Watts (without Doubler); 23 Watts (with Doubler).

Maximum Heat Dissipation

6 Watts (without Doubler); 8 Watts (with Doubler).

Mounting

STS, high-density slot431

Dimensions

Height:

5.6

" (

14

 c.m.)

Width:

1.4

" (

3.5

 c.m.)

Depth:

5.6

" (

14

 c.m.)

Weight: 1 lb. 2 oz.

Documentation

The HLU-

431

 List 

1D

 has a complete technical practice that you can 

download from the PairGain Technical Manuals Web page at: 
www.pairgain.com. A password is required. If you do not have a password, 
contact your PairGain sales representative.

If you have any comments on any PairGain documentation, send mail to 
[email protected].  Type the product name and the 
section number of the document in the subject area of the email message.

Technical Support

PairGain Technical Assistance is available 24-hours-a-day, 7-days-a-week by 
contacting PairGain Customer Service Engineering group at: 

Telephone:  (800) 638-0031 or (714) 832-9922 

Fax:  (714) 832-9924

During normal business hours (8:00 AM to 5:00 PM, Pacific Time, Monday 
- Friday, excluding holidays), technical assistance calls are normally 
answered directly by a Customer Service Engineer.  At other times, a request 
for technical assistance is handled by an on-duty Customer Service Engineer 
through a callback process.  This process normally results in a callback within 
30 minutes of initiating the request.

Summary of Contents for 150-1504-14





















Reviews: