PairGain 150-1140-42, Manual

Page: 31 / 56

150-319-142-01 December 22, 1997 Revision 01
HLU-319 List 4B PairGain Engineering - Plant Series 25
L DIS Configures the HiGain system to ignore the (2-in-5) in-band
SmartJack loopback command.
ENA* Enables the HiGain system to recognize the (2-in-5) in-band
SmartJack loopback command.
S GNLB* Configures the HiGain system to respond to the generic
(3/4/5/6-in-7) in-band loopback codes.
(S
cont) A1LB and A2LB Configures the HiGain system to respond to the Teltrend
addressable repeater in-band loopback codes.
A3LB Configures the HiGain system to respond to the Wescom
addressable repeater in-band loopback codes.
A4LB Configures the HiGain system to respond to the Wescom
Mod 1 addressable repeater in-band loopback codes.
A5LB Configures the HiGain system to respond to the Teltrend
Mod 1 addressable repeater in-band loopback codes.
P DIS Disables powering to the HRU-412 List 8B and doubler.
ENA* Enables powering to the HRU-412 List 8B and doubler.
Z ON Tells the HiGain system that the ESF frame is operating in its
Zero Byte Time Slot Interface (ZBTSI) mode.
OFF* Tells the HiGain system that the ESF frame is operating in its
normal non-ZBTSI mode.
R 17 Flashes the red Status LED when 17 Errored Seconds (ES)
(17 HDSL cyclic redundancy check (CRC) errors on either
HDSL loop or a total of 17 BPVs on DSX-1) occur within a
24 hour period.
170 Flashes the red Status LED when 170 ES (170 HDSL CRC
errors on either HDSL loop or a total of 170 BPVs on DSX-1)
occur within a 24 hour period.
NONE* Prevents generation of a minor alarm due to excessive
errored seconds.
Table 3. HLU-319 List 4B System Setting Menu Options (Continued)
Option Parameter Description
* Indicates HLU-319 List 4B factory (default) settings. (Continued)