Pai Technology 62119, Instruction Manual

Page: 37 / 40

Prepara�on
Before assembly, please prepare four 1.5V AA ba�eries, two 1.5V
AAA ba�eries and a Phillips head screwdriver (not included).
Installing the main control block ba�ery
1.Use a Phillips head screwdriver. Unscrew the bo�om screws
counter-clockwise and remove the ba�ery cover.
2.Insert four 1.5 V AA ba�eries in the direc�on indicated inside the
ba�ery compartment.
3.Replace the ba�ery cover. Use the screwdriver and screw
clockwise to fasten.
Installing the remote controller ba�ery
1.Use a Phillips head screwdriver. Unscrew the screws on the
ba�ery cover counter-clockwise.
2.Remove the ba�ery cover and insert two 1.5V AAA ba�eries in
the direc�on indicated inside the ba�ery compartment.
3.Replace the ba�ery cover and screw clockwise to fasten.
Switch
Remote controller: 2 1.5V AAA ba�eries
Please read the instructions
before using this product.
Ba�eries installing and changing (this should be done by an adult).
Note:
The following steps should be done
either by an adult or under adult supervision.