Pahlen Aqua compact User Manual Download Page 3

8

MA45-25 GB 

Translation of the original instruction (SE)

Electric heater Aqua compact

ENGLISH

It is important to read through this manual carefully in order to ensure the function and useful life of the pool equipment.

This manual can also be found at 

www.pahlen.com .

Pahlén AB is not responsible for product warranties or for damages that occur as a result of faulty installation, improper use or 

poor maintenance:

WARNING

• 

This device must not be used to heat drinking water.

• 

This apparatus must not be used in aggressive water, salt water or pools/hot tubs with 

 

chlorine machines/salt chlorinators, see the recommended values regarding the water 

 

quality.

• 

The water inlet on this device must not be connected to the water from any other water 

heating system.

• 

The heater must be installed in accordance with the applicable national legal statutes and 

directives, and the electrical installation must only be performed by a qualified electrician.

• 

Do not begin the installation of the product before you have read and understood the 

 

installation instructions and warnings in this manual. If you have any questions about the 

installation instructions or warnings, contact your local retailer.

• 

Under no circumstances may this device be started before it is completely filled with water.

• 

This device must not be covered, placed in the vicinity of inflammable material or in direct 

sunshine.

• 

This device must not be used by very small children (0-3 years old).

• 

This device must not be used by small children (3-8 years old) and persons with highly 

comprehensive and complex functional disabilities unless they are constantly supervised 

by a person responsible for their safety.

• 

This device may be used by children over 8 years of age, and by persons with impaired 

physical, sensory or mental capacity or with a lack of experience or knowledge, provided 

they have received guidance on how to use the device safely and that they have been 

made to understand the risks that may occur by a person responsible for their safety.

• Children must not play with the device.

• 

This device must not be cleaned or maintained by children without supervision.

• If the installation instructions are not followed, the product guarantee is null and void.

Summary of Contents for Aqua compact


















Reviews: