drawn. The batteries are protected against over-temperature by
means of a self-resetting thermal trip rated 71°C.
3.9
The battery is sealed, and contains no user-serviceable components.
In order to maintain the quality standard for which you first chose
this product, return it to a PAG Dealer or the PAG Service Depart-
ment for servicing.
4.1
Charging Instructions
4.1.1
The battery should be in a fully charged state before use.
Even after one week in storage it is advisable to give it a
top-up charge before use.
4.1.2
The battery should be charged only from a PAG charger. Other
types of charger may not be suitable, and could damage the
battery irreparably.
4.1.3
Suitable chargers for the PAGlok ZL-125 battery are:
> PAG AR124PLD (Model 9792)
> PAG Quasar (Models 9726 and 9752)
> PAG Freelancer (Model 9613)
These chargers are equipped with PAGlok connectors, which
allow the batteries to be connected directly to the charger,
without the use of separate connecting leads. The chargers
incorporate PAG ACS, a unique microcomputer control system
that enables these chargers to fast-charge any reputable make
of battery safely, while significantly extending its working life.
Suitable chargers for the V-Mount ZL-125 battery are:
> PAG Cube (Model 9702V)
> PAG V4-iPC (Model 9700V)
> PAG V2 (Model 9613V)
These chargers are equipped with V-Mount connectors, which
allow the batteries to be connected directly to the charger,
without the use of separate connecting leads. The chargers can
fast-charge PAG V-Mount batteries safely, while significantly
extending their working life.
4.1.4
When a battery has been discharged at a high current it will
become warm, and it is advisable to let it cool before charging
it. For the best results the battery should be charged within the
temperature range +10ºC to +40ºC.
4.2
Power & Time Display:
ZL-125 Time Batteries incorporate the PAG Power & Time Display
which is able to show a predicted run-time against any given
load. Connect the battery to the camera, and turn the camera
on. The battery requires a minimum of 5 seconds before it is able
to give an accurate run-time prediction. When the display
button is pressed, the battery will indicate the predicted run-
time under the prevailing conditions.
The hours will be displayed first, followed by the minutes.
The battery is also able to indicate the remaining capacity,
expressed either in ampere-hours or percentage. These figures are
available when the battery is not connected to a load.
The capacity in ampere-hours will be shown first, and if the
button is pressed a second time, the battery will display the
capacity as a percentage of maximum.
If the battery is either 100% charged or 0% charged, this is
shown by an illuminated bar which indicates 'Full' or 'Empty'.
If the button is held in continuously, the display will operate for a
short period and will then automatically turn off. This ensures
that the battery cannot become discharged if the button is
accidentally held in during transit or storage.
Time Batteries are self-diagnostic. Prior to any cumulative effect
developing as permanent damage the battery will report that it
requires a service charge. This is shown by the capacity display
pulsing with a 50% on/off duty cycle when the button is pressed.
A complete charge (the battery display must register ‘FULL’)
followed immediately by a complete discharge will clear the
condition, and the battery will confirm this by showing the
normal display when the button is pressed.
5.1
Notwithstanding any provision of any agreement the following
Warranty is exclusive: PAG Limited warrants each PAG ZL-125
battery it manufactures to be free of defects in material and
workmanship under normal use and service for
18 MONTHS
from
the date of purchase. This warranty extends only to the original
purchaser. This warranty shall not apply to fuses or any product or
parts which have been subject to misuse, neglect, accident or
abnormal conditions of operation.
5.2
In the event of failure of a product covered by this warranty, PAG
Limited will repair and calibrate equipment returned to an
authorised Service Facility within the period of the warranty,
provided the warrantor’s examination discloses to its satisfaction
the product was defective. The warrantor may, at its option,
replace the product in lieu of repair. With regard to any equipment
returned within this period, said repairs or replacements will be
made without charge. If the failure has been caused by misuse,
neglect, accident or abnormal conditions of operation, repairs will
be billed at a nominal cost. In such a case, an estimate will be
submitted before work is started, if requested.
5.3
The foregoing Warranty is in lieu of all other warranties, express or
implied, including but not limited to any implied warranty or
merchantability, fitness or adequacy for any particular purpose or
use. PAG Limited shall not be liable for any special, incidental, or
consequential damages, whether in contract, tort, or otherwise.
Instructions for Use
U5109 ISS A / JUN 09
PAG Ltd.
565 Kingston Road, Raynes Park, London SW20 8SA, UK.
Tel +44 (0)20 8543 3131 Fax +44 (0)20 8540 4116 E-mail [email protected] Web Site www.paguk.com
Warranty
