3
2.1
Model No. 9700V:
◗
Four simultaneous* fast-charging channels.
◗
Bright, informative Liquid Crystal Display.
◗
Intelligent Parallel Charging (iPC).
◗
Lightweight, travel-friendly design.
*Sequential when used with Nickel-Metal Hydride batteries.
2.2
Range of Batteries Charged:
◗
PAG V-Mount Lithium-Ion batteries.
◗
Sony V-Mount Lithium-Ion batteries.
◗
PAG V-Mount Nickel-Metal Hydride batteries.
◗
Sony V-Mount Nickel-Metal Hydride batteries.
2.3
Battery Connections:
V-Mount compatible connector.
2.4
Main Charge Program:
◗
Li-Ion Intelligent Parallel Charging program.
◗
Maximum output 6A at 16.8V.
2.6
Recovery Charge Program:
This special program will automatically recover a PAG or Sony V-Mount
Li-Ion battery where the output has been shut down. Additionally, the
program detects batteries having a very low voltage, and initiates a
special low charge current. The program will operate until the voltage
has risen sufficiently for batteries to safely accept the normal charge
current.
2.7
Self Test Program:
The internal microcomputer constantly monitors the battery under
charge or process as well as the operation of the charger’s own
functions which will be shut down to a safe condition should any of the
tests fail.
2.8
Mains Input:
90V to 265V AC. Frequency 50-60 Hz. EN6100-3-2 Power factor
corrected. Maximum consumption 140W.
2.9
Output Protection:
Charger protected against short circuit and excess battery voltage.
2.10
AC Mains Failure Protection:
Should mains failure occur during a charging program, or whilst the
charger is connected, it will shut down to a safe condition.
SPECIFICATION
SECTION 2
