background image

U5047A PAG QUASAR INSTRUCTION MANUAL

U5047A PAG QUASAR INSTRUCTION MANUAL

If the replacement of the fuse fails to correct the above symptoms,
do not attempt further fuse replacement. It is likely that a fault has
developed. Seek advice from your nearest PAG dealer or direct from
PAG Ltd., London, by telep44 (0) 20 8543 3131.

5.4

Quasar chargers feature a fail-safe shutdown mode. In the unlikely
event of an internal malfunction, an error message will be displayed
on the screen to show that the charger is in shutdown mode. This
could be the result of any number of undesirable situations from
which the system is protecting itself, such as the obstruction of
ventilation slots causing inadequate cooling, or the microcomputer’s
detection of an internal fault. In these cases the charger should be
disconnected from the supply, any obstruction of the air vent system
removed, and the unit allowed to cool before reconnecting to the
supply. Should the charger re-enter the fail-safe shutdown mode, more
detailed investigation is required. Make a note of the error message,
and seek advice from your nearest PAG dealer, or direct from PAG Ltd.,
London, by telep44 (0) 20 8543 3131.

5.5

Unqualified personnel should not attempt further investigation (see
paragraph 5.1). Any such interference would invalidate the guarantee
and invariably cause more damage than the original fault.

6.1

Notwithstanding any provision of any agreement the following
Warranty is exclusive: PAG Limited warrants each 

PAG Quasar 

charger

it manufactures to be free of defects in material and workmanship
under use and service for 

two years

 from the date of purchase. This

warranty extends only to the original purchaser. This warranty shall
not apply to fuses or any product or parts which have been subject to
misuse, neglect, accident or abnormal conditions of operation.

6.2

In the event of failure of a product covered by this warranty, PAG
Limited will repair and calibrate equipment returned to an authorised
Service Facility within the period of the warranty, provided the
warrantor’s examination discloses to its satisfaction the product was
defective. The warrantor may, at its option, replace the product in
lieu of repair. With regard to any equipment returned within this
period, said repairs or replacements will be made without charge. If
the failure has been caused by misuse, neglect, accident or abnormal
conditions of operation, repairs will be billed at a nominal cost. In
such a case, an estimate will be submitted before work is started, if
requested.

6.3

The foregoing Warranty is in lieu of all other warranties, express or
implied, including but not limited to any implied warranty or
merchantability, fitness or adequacy for any particular purpose or use.
PAG Limited shall not be liable for any special, incidental, or
consequential damages, whether in contract, tort, or otherwise.

WARRANTY

SECTION 6

13

14

Summary of Contents for PAG Quasar








Reviews: