reputable manufacturer’s Li-Ion chargers. The MPL50G is compatible
with PAGlink and Anton/Bauer chargers for maximum versatility and
economic integration.
1.14
Batteries in any state of charge can be linked for charging, in
multiples of 8 or fewer. During charging, the least-charged batteries
are given priority. When the batteries reach a similar state of charge,
they will charge simultaneously. The charge status of each battery is
shown on its individual display.
1.15
The MPL50G battery features an ergonomic design and a ‘soft-touch’
coated protective band for safer handling and increased durability.
1.16
Two 1/4” bush inserts have been incorporated to enable the
mounting accessories to individual or linked batteries.
1.17
The battery display provides remaining run-time, on-load, in 1 minute
increments, for the total of all linked batteries. It shows remaining
capacity for each individual battery in 1% increments, at any time. It
also provides useful data, such as the number of charge/discharge
cycles, to assist with battery management.
1.18
When linked, Mini PAGlink batteries form a network that allows them
to communicate with each other and report to the camera as one
battery.
1.19
The MPL50 will automatically detect and adapt to the camera data
system that allows Anton Bauer Gold Mount batteries to provide
capacity information in the camera viewfinder/LCD.
1. Introduction
1.20
The battery’s fully-serviceable, modular construction allows
authorised replacement of the cell-pack whilst maintaining
conformity with UN standards.
1.21
The battery and charger firmware can be updated easily by the
customer, via external contacts, using an update tool provided by
PAG.
1.22
PAG’s patented intelligent battery linking technology remains far in
advance of any other camera battery system available today.
1.23
PAG Li-Ion batteries are tested by an independent authority to
UN standards in compliance with IATA Air Transport regulations.
Patents Apply: paguk.com/patents
6
