7. Run-Time, Capacity & Data
Press x3without
holding for software
version
Press & hold for
version number...
...which appears in
2 parts indicating
version 2.0
After selecting to view the software version number, the battery will
enter
Ship Mode
automatically.
Ship Mode
reduces battery self-
discharge and can be used when you are going to store or ship your
batteries. To exit Ship Mode, link the battery to another active battery
or connect it to a charger that is powered-up.
7.3
In-Viewfinder Battery Status
Battery status can be shown as a percentage of available capacity in
the viewfinder/LCD of cameras designed to accept this data. Different
data standards are used by camera and battery manufacturers. PAGlink
Gold Mount batteries automatically adjust the data output standard to
support the system that allows Anton Bauer batteries to display
capacity information in the viewfinder/LCD. When the batteries are
linked, the data displayed is for the combined capacity available.
15
7.4
PAGlink Battery Reader
The PAGlink Battery Reader (Model 9647A) is an accessory that can be
used to display data stored in the battery’s microprocessor. When
connected to the battery contacts it will provide information that is
beneficial for managing your batteries:
Reader Menu:
1. State of charge as a percentage
2. Available capacity in ampere-hours
3. Cell temperature in degrees Celsius
4. Number of charge/discharge cycles
5. Voltage
6. Full capacity in ampere-hours
7. Date of birth (manufacture)
8. Software version
9. Serial number
