Product No. 043-5264-0
10
screen will show the time count-up
during brewing process. The time
count-up indicates the elapsed time in
the brewing process.
NOTE: If there is no water in the
reservoir to begin brewing, the coffee
maker will beep, and the batch size
icon will begin blinking. Add more
water and press “Start/Pause” again
to begin the brew cycle.
NOTE: The glass carafe can be
removed at any time during brewing
cycle. The appliance will stop dripping
automatically. The carafe should be
put back into position on the warming
plate within 30 seconds.
7.
Press “Start/Pause” to temporarily
stop the brewing cycle. Press “Start/
Pause” again to resume the brewing
process.
8.
When the brewing cycle is complete,
the coffee maker will beep. The coffee
maker will enter the “Keep Warm”
function, and the “Keep Warm” button
will become illuminated. The display
screen will show time count up to
indicate time elapsed in the “Keep
Warm” function. After 30 minutes,
the machine will beep and the “Keep
Warm” button will turn off.
NOTE: To deactivate “Keep Warm”
function, press the button again. If the
button is pressed after the 30 minutes
are done, “Keep Warm” function will
activate again.
9.
Remove the glass carafe to serve
when brewing is finished (remove
NOTE: Sleep mode is activated after
2 minutes if the coffee maker is idle
and not brewing. The dial turns off
and only the clock will show on the
display screen. To wake the coffee
maker, user can either click/rotate
the dial once or press any button.
The dial will become illuminated.
The display screen will then return
to the settings it was set at before
going into sleep mode.
Operating Instructions
1.
Open the top lid and fill the water tank
with cold drinking water. The water
level should not exceed MAX level as
indicated on the water level gauge.
2.
Place the funnel into the funnel
support and ensure that the funnel is
positioned correctly. Then place the
permanent filter or paper filter in the
funnel, and ensure that it is positioned
correctly.
3.
Add ground coffee into permanent
filter or paper filter. Usually a cup of
coffee needs a level spoon of ground
coffee, but you may adjust according
to your personal taste.
4.
Insert the glass carafe on the warming
plate.
5.
To reset brewing preferences, click
dial to enter “Brew Settings” mode.
6.
To begin brewing immediately, press
“Start/Pause” button. The “Start/
Pause” and “Cancel/Return” buttons
will become illuminated. The display
TR1700026_A.indd 10
9/25/19 7:44 AM
