Paderno 4-Blade Instructions Manual Download Page 7

Page: 7 / 8

To Make Spiral Accordion Cuts:
Step 1

. Pierce food with metal pin, making sure to push

needle all the way through food item. Remove the needle.

Step 2.

Insert a wooden skewer (not included) through the

back of the corer and into the piercing previously made with

the metal pin into food. Aﬃx food centrally between corer

and prongs, then begin turning the crank to start slicing.

Step 3.

Remove wooden skewer and expand the accordion. If

necessary, transfer food to a longer skewer before expanding

to hold contents securely.

Summary of Contents for 4-Blade

Page 1: ...contact Customer Service at 877 778 2711 For recipes visit www padernoUSA com For safety and ease of use read instruc8ons thoroughly and carefully before the ﬁrst use Be sure to become familiar with each component and always handle blades with cau8on as they are extremely sharp ...

Page 3: ...Components Straight Blade 2 5 mm Angel Hair Blade 1 2x2 mm Shredding Blade 3x3 mm Chipping Blade 4x6 mm ...

Page 4: ...s a food tray Step 2 Remove the 6 needle from the Slider Unit and put aside for later use The Slider Unit is an L shaped piece that comes stored upside down One side has a rectangular spinning wheel with sharp prongs Step 3 Pull out the Slider Unit by sliding it sideways Figure 1 Figure 2 Figure 3 ...

Page 7: ... wooden skewer not included through the back of the corer and into the piercing previously made with the metal pin into food Aﬃx food centrally between corer and prongs then begin turning the crank to start slicing Step 3 Remove wooden skewer and expand the accordion If necessary transfer food to a longer skewer before expanding to hold contents securely ...