page
12
Paddle Palace H2W Touch Pro Robot
User Manual
Warning
To prevent the danger of fire, electric shock, personal injury and product damage, children should be
supervised while operating the robot:
P
Instructive advice should be given when machine is used by children.
P
Avoid windy and/or rainy days when using outdoors.
P
Use care when connecting and disconnecting the ball collecting net.
P
When robot is operating, please keep away from the shooting head to avoid being hit with a ball.
P
When robot is operating, if you observe something abnormal, such as smoke coming out of the robot,
stop the robot and unplug it immediately. Repair must be performed by a qualified repair person.
P
Do not remove the housing/cover of the robot without authorization.
P
Some places on the robot will heat up during operation. Please be careful and pay attention so as to
avoid burning yourself.
P
Turn the power switch off and unplug the robot after use.
If any damage or loss is incurred due to the fact that safety instructions and regulation were not followed, or
the robot was not properly used as instructed in this manual, our company will not take any responsibility.
Touchscreen Use and Maintenance
1. The touchscreen panel is a precise device that requires careful operation. And the touchscreen is fragile, so any
strong impact or oscillation may damage the touchscreen. Do not press too hard on the display area of the
touchscreen. When using or storing the panel, please avoid any scratches caused by the hard objects on the
surface of touchscreen.
2. Please use and store the touchscreen panel within the acceptable temperature range. The normal operating
temperature of the touchscreen panel is from 10˚C to 60˚C. The relative humidity for storing and transporting
is 20% to 80%. If the touchscreen panel is used or stored below the acceptable temperature/relative humidity,
the surface may crystallize, leading to unrecoverable damage. If the touchscreen panel is used or stored above
the acceptable temperature/relative humidity, the liquid crystal on the touchscreen may liquefy, leading to
unrecoverable damage.
3. Do not open, disassemble, and reconfigure the panel. This may damage the touchscreen, and cause
malfunction of the control panel.
4. Keep the surface of touchscreen clean. The surface may change color or have spot/blot if water has been
spilled and sits on the surface for a long time. If the touchscreen has a spot or becomes dirty, please clean it
with a pure cotton or soft cloth. Do not use gasoline, alcohol or any chemical to wipe the surface.
5. If any reason that you need to store the touchscreen panel for a long period, we suggest you to do the following:
P
Place it in a dark area, keep away from the strong light.
P
Do not put anything on the surface of the panel.
P
Do not store it in an area that exceeds the acceptable temperature/relative humidity.
Do NOT mix celluloid and poly balls together in
the machine. This will cause inconsistent operation.
H H
H H