background image

2

General Safety Instructions

1.  This Manual shall be considered an integral part 

 

of the machine and should be carefully looked after 

 

for subsequent reference.

2.  WARNING Read this instruction manual before 

 

using this machine and always follow the Safety  

 

and Maintenance instructions.

3.  WARNING Operators shall be adequately instructed 

 

on the use of this machine.

4.  WARNING This machine is not suitable for picking 

 

up hazardous dust (Contact Pacvac for specific 

 

equipment for this use).

5.  WARNING Do not allow the power cord to come 

 

into contact with rotating brushes of floor tools.

6.  WARNING Do not use this machine in wet conditions.
7.  CAUTION This machine is for indoor use only. 
8.  CAUTION This machine shall be stored indoors only. 
9.  WARNING If foam or liquid escapes from the machine,  
 

switch off immediately.

10.  CAUTION Clean the water level limiting device  
 

regularly and examine it for signs of damage.

11.  Remove the machine from packaging and ensure 

 

it and all its accessories and attachments are present 

 

and in perfect condition. Contact the place of purchase 

 

immediately in the event of any discrepancies.

12.  The electrical specifications of this machine are noted 

 

on the data plate which is located near the power 

 

switch. Ensure the specifications correspond to those 

 

of the mains power supply in your area. If the machine 

 

is without a data plate, contact the place of purchase  

 immediately.
13. This machine is intended for commercial use, for 

 

example in hotels, schools, hospitals, factories, shops 

 

or offices.

14.  Do not restrict the vacuum cleaner’s airflow. Maintain the 

 

vacuum cleaner regularly so that all filters and openings 

 

are free of dust, lint, hair build-up or anything else 

 

which may affect airflow. Refer to the maintenance 

 

instructions in the Product & Training manual.

15.  If the machine has been dropped, damaged, left 

 

outdoors or has been exposed to liquids, return it 

 

to your local Authorised Pacvac Service Agent for 

 

a safety check.

16.  Do not use the machine to pick up flammable 

 

or combustible liquids, such as petrol etc. and 

 

do not use in areas where they may be present.

17.  Do not vacuum anything that is burning or smoking

 

such as cigarettes or hot ashes.

18.  Do not vacuum up hard or sharp objects (glass, 

 

nails, screws etc).

19.  Keep hair, loose clothing, fingers and all parts of the 

 

body away from moving parts and openings.

20.  Keep the machine and power cord away from heated 

 surfaces.

21.  Do not unplug the machine while it is turned on. 

 

Turn the machine OFF, turn the power off at the 

 

power outlet then unplug by grasping the plug and 

 

pulling gently 

to unplug. 

22.  Do not handle the machine, power cord or plug 

 

with wet hands.

23.  Unplug from power point when not in use, before 

 

servicing or before changing filters, brushes and/or 

 attachments. 
24. Do not pull or carry the machine by the power cord.
25.  Do not close doors on the power cord and do not 

 

pull the cord around sharp edges or corners.

26.  Regularly check the power cord for damage, such as 

 

cuts, abrasions, exposed wiring or aging. If the power 

 

cord or plug is damaged, the complete power cord 

 

must be replaced by your local Authorised Pacvac 

 

Service Agent in order to avoid an electric shock. The 

 

power cord should only be replaced with a Pacvac 

 

Genuine Spare Part with the same specifications.

27.  Store in an appropriate place after use to prevent 

 

tripping accidents.

28.  This appliance is not intended for use by persons

 

(including children) with reduced physical, sensory 

 

or mental capabilities, or lack of experience and 

 

knowledge, unless they have been given supervision 

 

or instruction concerning use of the machine by a

 

person responsible for their safety. Children should

 

be supervised to ensure that they do not play with

 

this machine.

29.  Use only the manufacturer’s recommended 

 

attachments and/or replacement parts.

Summary of Contents for HYDROPRO SERIES





















Reviews: