7. Clearing Blockages
Turn vacuum cleaner off and disconnect the power plug
from the power point.
The flexible hose can be disconnected from the vacuum
cleaner by rotating anti-clockwise and pulling away from
the machine. Remove any blockages found then
reconnect the hose. (Fig.7_1)
9. troubleshooting
www.pacvac.com
Support: 08 9479 1444
note: Disconnect the power cord
before maintenance, servicing and
troubleshooting.
fig.7_1
8. technical Specification
Voltage:
220-240V ~50Hz
Wattage:
1300W (max)
Noise:
<74 dB(A)
Capacity:
15 litres
Filters:
Foam pre-motor filter or HEPA filter
Microfiltration cage
Cord length:
18m
Weight:
5.81kg (dependant on model)
Subject to technical change without notice.
8
9
10. Glide Parts Profile
1
x2
x4
x6
x2
x2
x6
x5
x2
2
3
4
5
6
7
8
9
10
37
40
38
35
34
32
33
31
30
27
23a
22
21
29
26
20
19
18
17
16
15
14
13
12
11
36
23a
24
25a
25b
28a
28b
37a
37b
37c
41
42
39
43
CD1501 BoM
no. Part name
Part no.
1. Handle cover
G103
2. Handle base
G105
3. Top cover
G107
4. Exhaust filter
G259
5. Motor housing
G256
6. Noise insulation
G254
7. Latch
G131B
8. Middle base
G115B
9. Screw
G10
10. Noise insulation
G255
11. On/Off button
G261/2
12. Spring
G435
13. Screw
G11
14. Switch pedal
G260
15. Switch
G261
16. Screw
G12
17. 2-hole stopple
G17
18. Power cord assy
G108
19. Screw
G13
20. Pedal for power cord G262
21. Screw
G14
22. Thermal cut-out
G01A
23a. Right motor bracket
G276R
23b. Left motor bracket
G276L
24. Motor
G118
25a. Motor gasket
G253
25b. Motor housing gasket G253B
26. Air inlet grill
G26B
27. Screw
G15
28a. Motor filter
G522
28b. HEPA filter
G288
Note: Part standard for Glide
HEPA model or available as
upgrade for standard Glide
29. Cuff for air inlet grill
G29
30. Seal for SMS Filter
G126
31. Retainer for SMS Filter G127B
32. SMS filter
G128
33. Dustbag (Reuseable) G129
34. Main cannister
G252
35. Castor wheel
G145
36. Suction pedestal
G138
37. Hose assembly complete G32B
37a. Bent hand piece
KC330
37b. Hose cuff hull
KC300
37c. Hose cup ring
KC310
38. Wand
KC909/2
39. Floor Tool
UA908W
40. Crevice Tool
KC911
41. Dusting Brush
KC910
42. Upholstery tool
KC912
43. Disposable Paper Bags KC286
PRoBLeM: Vacuum Cleaner not working
Cause:
Power cord not firmly plugged into
power point.
Solution:
Plug power cord into power point firmly.
Cause:
Vacuum cleaner not turned on.
Solution:
Press on/off button.
Cause:
Thermal protector shuts cleaner off due to
high motor temperature.
Solution:
Turn main switch off and unplug the
vacuum cleaner. Ensure the filters are
clean. Inspect the wands, hose and floor
tool and remove any blockages. After 30
minutes the vacuum cleaner should be
ready for use. If not contact Pacvac for
your nearest Authorised Pacvac Service
Agent.
Cause:
Blown fuse / tripped breaker.
Solution:
Reset circuit breaker or replace fuse.
PRoBLeM: Vacuum Cleaner has no/poor suction
Cause:
Dust bag full.
Solution:
Remove, empty and clean dust bag.
Cause:
Dust bag not installed correctly.
Solution:
Remove and empty dust bag making sure
the rubber edging is correctly fitted around
the canister.
Cause:
Hose not installed correctly.
Solution:
Reconnect hose and ensure correctly
sealed.
Cause:
Blockages.
Solution:
Remove hose, wand and floor tools;
remove any blockages.
Cause:
Filters blocked.
Solution:
Clean filters.
