PACOM PC868, User Manual

Page: 14 / 22

Notice:
Probe tip (lens) is a most precise part in the thermometer. Please
keep clean and entirety in order to assure the accuracy of figure.
The probe tip and lens are the most delicate part of the
thermometer. It has to be clean and intact to ensure accurate
readings.
If the thermometer is ever accidentally used clean the probe and
lens as follows:
Very gently wipe the surface with a cotton swab or soft cloth
moistened with alcohol. After the alcohol has completely dried out.
If the lens is damaged, contact the distributor.
Clean the unit body:
Use a soft, dry cloth to clean the thermometer display and unit
body.
If very dirty, use a soft with alcohol to cleaning.
8. Care and cleaning
8) Restore the factory default function
Press the [Setup] button for 5s to restore the factory default status.
The factory default setup is “℃” and “Body measurement” mode.
9) Battery installment and replacement
1. When the quantity of electric charge is not sufficient, the icon of
low battery will appear on the lower part of the screen. Though the
battery still can be used, it would be perfect to replace it.
2. When the quantity of electric charge of the battery is lower than
the minimal value, “Lo” symbols will be displayed on the screen,
and battery icon flashes and the sound of “Beep” is sent out.
Unless you change a new battery, you can not use the thermometer
to conduct measurement.
3. Operation of changing battery.
4. Take out the old battery: Open the battery cap; put 2 new AAA
batteries on with correct cathode direction into the battery seat.
• Please observe the related national laws of disposing the
abandoned battery and don’t litter to the garbage can.
• Please take out the battery if the device is not used for
long periods of time.
• Please don’t put the battery in the fire.
To protect the environment, dispose of empty battery at your retail
store or at appropriate collection sites according to national or
local regulations.
- 13 -